Meggitt Si2400 Fire Cable

Meggitt Si2400 Fire Cable

With an increasing emphasis on loss prevention and fire safety, the need for reliable operation of emergency shutdown systems has never been greater. When a critical system fails to operate as designed, a small flash fire can rapidly grow in intensity. Within 5 minutes temperatures can reach above 2000 degrees F producing disastrous results. It is vital that personnel and equipment in areas where the possibility of a flash fire exists be protected to ensure minimal downtime and to avoid loss of valuable resources or life.

SI2400 Fire Cable is designed to provide continuous power and control signals throughout even the most severe high temperature fires. The cable has been tested at Southwest Research Institute under load per UL 1709 and Norwegian Petroleum Directorate (NPD) for three hours above 2100 degrees F. In addition, the cable was subjected to 1 hour and 3 hour tests by U.L. in accordance with the requirements of E-119. These tests effectively demonstrate the reliability that may make the difference between an orderly shutdown and a major catastrophe. SI2400 is the most cost effective and reliable electrical cable system available in the world.

Si2400

• Exceeds requirements for UL 1 hour & 3 hour fire rating to ASTM E-119
• CSA Approved, Class I, Class II & Class III, all groups
• Complies with NEC 501 - 4(a)
• Independently tested over 2100°F by Southwest Research Institute
• Stainless, Incoloy or other sheaths available upon request